my pipod

Hello,

this is my first post on the forums, and I wanted to share my case - pipod

Raspberry Pi inside old ipod case. Connections: Power, HDMI, LAN, 3.5mm stereo:

full.resized.jpg (53.01 KiB) Viewed 1883 times

Can even see raspberry pi logo in the ipod display!

screen.resized.jpg (45.03 KiB) Viewed 1883 times

Leds glow through the glue on the side of the case nicely...

leds.resized.jpg (46.29 KiB) Viewed 1883 times

More pics to come....

Top of the ipod. I flipped around the metal case so that the dock connector is now at the top of the ipod. With a fraction of a mm of filing and the sd card fits in to perfection next to the power lead:

top.resized.jpg (61.43 KiB) Viewed 1880 times

sd card can be removed from the slot and power lead removed too:

card slot.resized.jpg (60.1 KiB) Viewed 1880 times

So that is my case. Raspberry Pi all sealed up in side thanks to the glue now holding the ipod together. Unfortunately the ipod is a bit thinner than the pi, so the glue served to extend the gap between the top and the rear of the ipod. A bit messy, but I am happy with the homemade look of it

original mod

love the mod Man after my own heart, putting a pi into something like an Ipod

if you used viewtopic.php?f=32&t=9814, you could make your own mp3 player lol

Nice idea! I wanted to make mine pocket-sized, so I decided to replace the connectors instead.
viewtopic.php?uid=54716&f=40&t=32427&start=0
It's good to see that other people share the same inspiration though
Peter