Raspberry Pi • View topic

by **marcerickson** » Thu Jul 19, 2012 6:40 pm

I would have bought the first plastic case - it is very elegant.

I'm sorry, I don't like the aluminum case. It looks ugly to me.

by **Montala** » Thu Jul 19, 2012 7:11 pm

marcerickson wrote:I would have bought the first plastic case - it is very elegant.

If you are looking for a fully enclosed 'plastic' case, have you checked out www.modmypi.com where you will find something very similar to the one originally shown in this thread?

by **forumisto** » Mon Jul 23, 2012 8:53 am

dreamy wrote:Example of a very low cost case for raspberry pi.

what is the prize?

by **Dreamy2** » Tue Jul 24, 2012 3:55 pm

Launch pre-orders today for ICEberg Case Aluminium.
Price case € 79.90
We have 50 units in production for delivery in late August.
See our Blog for bookings

by **Montala** » Tue Jul 24, 2012 4:06 pm

Very nice indeed... but far too expensive for me, I'm afraid! :shock:

by **Dreamy2** » Wed Jul 25, 2012 7:21 am

New picture final version with slot for the establishment of Ribbon cable for the GPIO port.

by **cyrakuse** » Wed Jul 25, 2012 8:29 am

Very nice case !
But it's too expensive !
A case that cost 80€ to protect a Pi that cost 25$ :shock:

I prefer taking risk to break my pi and buy a new one instead of buy a very expensive case like this one :cry:

by **Dreamy2** » Wed Jul 25, 2012 9:14 am

Yes indeed we discussed the price with our manufacturer and we can lower the price by increasing the quantity ordered 300 units.
The price of case is now € 62.90.
Given the quality of case and options we can not do a better price.

by **Dreamy2** » Wed Jul 25, 2012 8:55 pm

Video Installation ICEberg Case

http://www.youtube.com/watch?v=uZP5z4t30rQ

by **walleee** » Sat Jul 28, 2012 12:39 pm

meh, ill forget about that idea....

by **Dreamy2** » Sat Jul 28, 2012 1:50 pm

This will not be your case because you do not need it but for prolonged use every day this case is entirely consistent with the expectation of some customers.
The plastic cases are much cheaper but it's not for the same use.

New design for first preorder with engraved logo

http://www.moovika.fr/raspberry-pi.fr/

by **Dreamy2** » Mon Aug 06, 2012 7:54 am

New pictures rendered

Reception of the first ICEberg cases at the end of the month

by **beruic** » Tue Aug 07, 2012 11:21 pm

If you get the price below 50, I'll buy two.

by **beruic** » Tue Aug 07, 2012 11:25 pm

Could you please post a link to somewhere I can order in english?

by **pygmy_giant** » Tue Aug 07, 2012 11:28 pm

It is super cool - for me to justify the cost I would have to be using it in a dedicated high value project or in a situation phere the pi is in physical jeapordy like in an autonomous vehicle/drone.

It looks military grade - can you stand on it?

If you could work out how to waterproof it via silicone rubber inserts and add fixing lugs you've got a very unique selling point.

by **Dreamy2** » Wed Aug 08, 2012 11:27 am

beruic wrote:Could you please post a link to somewhere I can order in english?

Into shop you can choose flag english now.

RPI in the box alumium is very well secured.
There is also an option for wall mounting or VESA

by **ianparkinson62** » Sun Aug 12, 2012 5:53 am

Slightly off topic but I have an Xtreamer mini keyboard (as in the imageon page 1) but the touchpad only works intermittently. What keyboard can I select in raspi-config to get this working correctly?
Cheers

by **Dreamy2** » Sun Aug 12, 2012 5:23 pm

Pictures we received from the factory.
Soon we'll be able to make a new video for Case V3 and other high resolution pictures.
Please note that the screws will not definitive black

For keyboard Xtreamer please be sure that the battery is charged or a reconnect to the keyboard and dongle with reset see manual.
Might also be defective because for me it works fine up to 4 meters

by **juju** » Sun Aug 12, 2012 8:59 pm

and that there must be logo ? ICE berg , ... logo raspberry ist no ? idea :roll:

by **Dreamy2** » Mon Aug 13, 2012 5:19 am

By default there will be the logo iceberg but there will be an option without logo with logo or raspberry.

by **Dreamy2** » Sat Aug 25, 2012 7:43 pm

New Picture with raspberry logo, new Video and new light led guide available on shapeways

First batch x50 pcs next week

by **Smelter** » Sun Aug 26, 2012 2:31 pm

tawalker wrote:If someone makes this case for a not-crazy price, I'd go for it... even better, could you add two extra USB ports?

Why not fit a hub to the lid? I can recommend the one I bought :- http://www.amazon.co.uk/gp/product/B004 ... 02_s00_i00

Iceberg Case Project

Who is online