Raspberry Pi Slim PS2 case

A little project I've just started...

http://www.stevenhoneyman.co.uk/2012/07 ... art-1.html
(pic heavy)

I'm having major issues with those usb hubs though, if anyone has any suggestions before I buy some more hubs to try?

I'm using this hub:
http://www.dealextreme.com/p/usb-smalle ... 468?item=4

And running power for an old dlink PS I had laying around that does 5v 2.5v

Have a nose through here its a list of known working ones usually its down to the controller chips from what i can see

http://elinux.org/RPi_VerifiedPeriphera ... d_USB_Hubs

I used a simple 4 way one from tesco, the pi reads the extra ports on boot and I have had no problems, I think it set me back about £3.50

Second and final part done. I was lucky the second time with a new hub
http://www.stevenhoneyman.co.uk/2012/07 ... art-2.html