overclock settings


2 posts
by spartacus » Sat Aug 17, 2013 8:10 am
why are the arch overclock settings different from raspbian? do the arch people think these settings work better? or is it a typo?

for the high setting, arch has core_freq=450. raspbian has core_freq=250.
Posts: 15
Joined: Tue Jan 01, 2013 5:06 am
by pepedog » Sat Aug 17, 2013 9:04 am
Arch has no overclock set, the samples were gained from raspbian.
Please point to where I can gleen these new settings

Edit:
From https://github.com/asb/raspi-config/blob/master/raspi-config
Next rootfs will have
## Some over clocking settings, govenor already set to ondemand

##None
#arm_freq=700
#core_freq=250
#sdram_freq=400
#over_voltage=0

##Modest
#arm_freq=800
#core_freq=250
#sdram_freq=400
#over_voltage=0

##Medium
#arm_freq=900
#core_freq=250
#sdram_freq=450
#over_voltage=2

##High
#arm_freq=950
#core_freq=250
#sdram_freq=450
#over_voltage=6

##Turbo
#arm_freq=1000
#core_freq=500
#sdram_freq=600
#over_voltage=6
Posts: 964
Joined: Fri Oct 07, 2011 9:55 am