Truecrypt Seems to work pretty well


43 posts   Page 1 of 2   1, 2
by fatcinco » Sun May 20, 2012 8:50 am
When using small 200 mb encrypted file containers, everything seems zippy.

root@raspberrypi:/mnt/bkdrive/Alison# truecrypt -m=nokernelcrypto encrypttest.tc /mnt/tc
Enter password for /mnt/bkdrive/Alison/encrypttest.tc:
Enter keyfile [none]:
Protect hidden volume (if any)? (y=Yes/n=No) [No]:
root@raspberrypi:/mnt/bkdrive/Alison# cd /mnt/tc
root@raspberrypi:/mnt/tc# ls
rude.png
root@raspberrypi:/mnt/tc#
Posts: 26
Joined: Tue May 15, 2012 4:50 am
by fatcinco » Sun May 20, 2012 10:10 am
I also tried it with drive encryption and large file containers - both seemed fine.
Posts: 26
Joined: Tue May 15, 2012 4:50 am
by AndiDog » Mon May 21, 2012 9:46 pm
I get the error "Error: mount: you must specify the filesystem type", and when I try specifying it manually it fails with "Error: mount: wrong fs type, bad option, ...".

How did you create the volume? I created one in the boot partition for testing using the following command:
Code: Select all
./truecrypt -t --create /boot/truecrypt-test.img --password=1234 --size=10485760 --volume-type=normal --encryption=AES --hash=Whirlpool --filesystem=vfat -k "" --random-source=/dev/urandom


This image works without problems when mounted from the TrueCrypt GUI in Windows 7.
Posts: 28
Joined: Sat Apr 07, 2012 6:01 pm
by AndiDog » Mon May 21, 2012 9:56 pm
An image created with the TrueCrypt GUI in Windows seems to work though, so I must be doing something wrong in the creation command line.
Posts: 28
Joined: Sat Apr 07, 2012 6:01 pm
by fatcinco » Mon May 21, 2012 10:58 pm
I set --filesystem=none, I think. I can double check in a couple hours.
Posts: 26
Joined: Tue May 15, 2012 4:50 am
by finnw » Tue May 22, 2012 10:16 am
How did you build TrueCrypt for the Pi?

I know you need the NO_ASM option, but what about the wxGTK dependency? I couldn't get it to work with the version from Debian Squeeze.
Posts: 24
Joined: Wed May 16, 2012 7:05 pm
by fatcinco » Tue May 22, 2012 2:40 pm
Downloaded source and source for wxWidgets
Downloaded ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/ (pkcs#11 .h files)

export PKCS11_INC=/home/pi/crypto
make WX_ROOT=/home/pi/wx/ wxbuild
make WXSTATIC=1
Posts: 26
Joined: Tue May 15, 2012 4:50 am
by finnw » Wed May 23, 2012 6:12 pm
fatcinco wrote:Downloaded source and source for wxWidgets
Downloaded ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/ (pkcs#11 .h files)

export PKCS11_INC=/home/pi/crypto
make WX_ROOT=/home/pi/wx/ wxbuild
make WXSTATIC=1


It's working now. The WXSTATIC was what I needed, thanks!
Posts: 24
Joined: Wed May 16, 2012 7:05 pm
by komw » Mon Jun 04, 2012 8:10 pm
Could you post some benchmarks of use truecrypt?
Posts: 3
Joined: Mon Jun 04, 2012 8:09 pm
by amar » Sun Jun 10, 2012 4:22 pm
fatcinco wrote:Downloaded source and source for wxWidgets
Downloaded ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/ (pkcs#11 .h files)

export PKCS11_INC=/home/pi/crypto
make WX_ROOT=/home/pi/wx/ wxbuild
make WXSTATIC=1


Are you using debian image or?

I tried both, installing wx from apt and from source but everytime build ends with

Code: Select all
pi@raspberrypi:~/truecrypt-7.1a-source$ make NOGUI=1 NOASM=1
Linking truecrypt
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x8): undefined reference to `wxApp::GetClassInfo() const'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x2c): undefined reference to `wxApp::GetEventTable() const'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x30): undefined reference to `wxApp::GetEventHashTable() const'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x44): undefined reference to `wxApp::Initialize(int&, wchar_t**)'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x50): undefined reference to `wxApp::OnInitGui()'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x58): undefined reference to `wxAppBase::OnExit()'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x5c): undefined reference to `wxApp::CleanUp()'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x64): undefined reference to `wxAppBase::Exit()'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x68): undefined reference to `wxAppBase::OnInitCmdLine(wxCmdLineParser&)'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x6c): undefined reference to `wxAppBase::OnCmdLineParsed(wxCmdLineParser&)'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x88): undefined reference to `wxApp::Yield(bool)'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x8c): undefined reference to `wxApp::WakeUpIdle()'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x90): undefined reference to `wxAppBase::CreateTraits()'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x94): undefined reference to `wxAppBase::MainLoop()'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x98): undefined reference to `wxAppBase::ExitMainLoop()'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0x9c): undefined reference to `wxAppBase::Pending()'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0xa0): undefined reference to `wxAppBase::Dispatch()'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0xa4): undefined reference to `wxAppBase::ProcessIdle()'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0xa8): undefined reference to `wxAppBase::SendIdleEvents(wxWindow*, wxIdleEvent&)'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0xb4): undefined reference to `wxAppBase::GetTopWindow() const'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0xb8): undefined reference to `wxAppBase::GetDisplayMode() const'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0xc4): undefined reference to `wxAppBase::GetLayoutDirection() const'
TextUserInterface.o:(.rodata._ZTVN9TrueCrypt17TextUserInterfaceE+0xc8): undefined reference to `wxAppBase::SetActive(bool, wxWindow*)'
UserInterface.o: In function `TrueCrypt::UserInterface::UserInterface()':
UserInterface.cpp:(.text._ZN9TrueCrypt13UserInterfaceC2Ev+0x8): undefined reference to `wxApp::wxApp()'
UserInterface.cpp:(.text._ZN9TrueCrypt13UserInterfaceC2Ev+0x16c): undefined reference to `wxApp::~wxApp()'
UserInterface.o: In function `TrueCrypt::UserInterface::~UserInterface()':
UserInterface.cpp:(.text._ZN9TrueCrypt13UserInterfaceD0Ev+0x2c8): undefined reference to `wxApp::~wxApp()'
UserInterface.cpp:(.text._ZN9TrueCrypt13UserInterfaceD0Ev+0x2fc): undefined reference to `wxApp::~wxApp()'
UserInterface.o: In function `TrueCrypt::UserInterface::~UserInterface()':
UserInterface.cpp:(.text._ZN9TrueCrypt13UserInterfaceD1Ev+0x2c8): undefined reference to `wxApp::~wxApp()'
UserInterface.cpp:(.text._ZN9TrueCrypt13UserInterfaceD1Ev+0x2f4): undefined reference to `wxApp::~wxApp()'
UserInterface.o:UserInterface.cpp:(.text._ZN9TrueCrypt13UserInterfaceD2Ev+0x2c8): more undefined references to `wxApp::~wxApp()' follow
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x8): undefined reference to `wxApp::GetClassInfo() const'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x2c): undefined reference to `wxApp::GetEventTable() const'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x30): undefined reference to `wxApp::GetEventHashTable() const'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x44): undefined reference to `wxApp::Initialize(int&, wchar_t**)'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x50): undefined reference to `wxApp::OnInitGui()'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x54): undefined reference to `wxAppBase::OnRun()'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x58): undefined reference to `wxAppBase::OnExit()'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x5c): undefined reference to `wxApp::CleanUp()'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x64): undefined reference to `wxAppBase::Exit()'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x68): undefined reference to `wxAppBase::OnInitCmdLine(wxCmdLineParser&)'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x6c): undefined reference to `wxAppBase::OnCmdLineParsed(wxCmdLineParser&)'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x88): undefined reference to `wxApp::Yield(bool)'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x8c): undefined reference to `wxApp::WakeUpIdle()'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x90): undefined reference to `wxAppBase::CreateTraits()'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x94): undefined reference to `wxAppBase::MainLoop()'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x98): undefined reference to `wxAppBase::ExitMainLoop()'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0x9c): undefined reference to `wxAppBase::Pending()'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0xa0): undefined reference to `wxAppBase::Dispatch()'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0xa4): undefined reference to `wxAppBase::ProcessIdle()'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0xa8): undefined reference to `wxAppBase::SendIdleEvents(wxWindow*, wxIdleEvent&)'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0xb4): undefined reference to `wxAppBase::GetTopWindow() const'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0xb8): undefined reference to `wxAppBase::GetDisplayMode() const'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0xc4): undefined reference to `wxAppBase::GetLayoutDirection() const'
UserInterface.o:(.rodata._ZTVN9TrueCrypt13UserInterfaceE+0xc8): undefined reference to `wxAppBase::SetActive(bool, wxWindow*)'
UserInterface.o:(.rodata._ZTIN9TrueCrypt13UserInterfaceE+0x8): undefined reference to `typeinfo for wxApp'
collect2: ld returned 1 exit status
make[1]: *** [truecrypt] Error 1
make: *** [all] Error 2
pi@raspberrypi:~/truecrypt-7.1a-source$
Posts: 5
Joined: Mon Feb 20, 2012 12:35 pm
by netomx » Wed Jun 20, 2012 3:03 am
no luck for me too :(
Posts: 80
Joined: Tue Oct 11, 2011 4:06 am
by fatcinco » Wed Jun 20, 2012 5:58 pm
I am using Debian image.

Is the compile for wx going ok? And did you clean any bad installs?
Posts: 26
Joined: Tue May 15, 2012 4:50 am
by netomx » Thu Jun 21, 2012 4:00 am
no and yes :(
Posts: 80
Joined: Tue Oct 11, 2011 4:06 am
by fatcinco » Thu Jun 21, 2012 6:31 am
(I know the questions are stupid but just to confirm)
You:
Downloaded the sources
for wx you ./configure (that ran for forever)
(Configured wxWidgets 2.8.12 for `armv6l-unknown-linux-gnu')
make (runs for twice as long)
(mine is still going but I think the next steps were: - I will check again the morning)
Are things working up to this point?

export PKCS11_INC=/home/pi/crypto <this should be the directory of the headers you downloaded

then in truecrypt dir
make WX_ROOT=/home/pi/wx/ wxbuild <directory to wx
make WXSTATIC=1
Posts: 26
Joined: Tue May 15, 2012 4:50 am
by netomx » Thu Jun 21, 2012 8:55 pm
I'm doing this, but will work for a headless station?
Posts: 80
Joined: Tue Oct 11, 2011 4:06 am
by ken_fallon » Tue Jul 31, 2012 2:29 pm
These are the steps that I took to compile the application without a gui.
To compile the application do as suggested above. The wxbuild took me 23m21.490s and the make of TrueCrypt itself took 51m29.737s
Code: Select all
$ export PKCS11_INC=/usr/local/src/truecrypt/pkcs/
$ make NOGUI=1 WX_ROOT=/usr/src/wxWidgets wxbuild
$ make NOGUI=1 WXSTATIC=1
$ sudo cp -v Make/truecrypt /usr/local/bin/

You can then run it using the following command.
Code: Select all
truecrypt -t -k "" --protect-hidden=no /tmp/test.truecrypt /tmp/key/ -v -m=nokernelcrypto
Posts: 2
Joined: Tue Jul 31, 2012 1:00 pm
by Forumkel » Tue Sep 11, 2012 11:10 am
When trying a large partition on my 3TB USB drive I get this:
Code: Select all
Error: Error: The drive uses a sector size other than 512 bytes.

Due to limitations of components available on your platform, partition/device-hosted volumes on the drive can only be mounted using kernel cryptographic services.

Possible solutions:
- Enable use of the kernel cryptographic services (Preferences > System Integration).
- Use a drive with 512-byte sectors.
- Create a file-hosted volume (container) on the drive.

I'm using XBian and tried to build the dm kernel modules following this howto: http://elinux.org/RPi_Kernel_Compilation
But there doesn't seem to be any dm support at all?
Posts: 1
Joined: Tue Sep 11, 2012 11:03 am
by chrisprt » Mon Nov 26, 2012 6:37 am
AndiDog wrote:I get the error "Error: mount: you must specify the filesystem type", and when I try specifying it manually it fails with "Error: mount: wrong fs type, bad option, ...".

How did you create the volume? I created one in the boot partition for testing using the following command:
Code: Select all
./truecrypt -t --create /boot/truecrypt-test.img --password=1234 --size=10485760 --volume-type=normal --encryption=AES --hash=Whirlpool --filesystem=vfat -k "" --random-source=/dev/urandom


This image works without problems when mounted from the TrueCrypt GUI in Windows 7.


I'm having the same problem unfortunately. I've tried ext3, ext4 and NTFS.

[Mon Nov 26 01:33:47 2012] FAT-fs (loop1): invalid media value (0xb0)
[Mon Nov 26 01:33:47 2012] FAT-fs (loop1): Can't find a valid FAT filesystem
[Mon Nov 26 01:33:47 2012] NTFS-fs warning (device loop1): is_boot_sector_ntfs(): Invalid boot sector checksum.
[Mon Nov 26 01:33:47 2012] NTFS-fs error (device loop1): read_ntfs_boot_sector(): Primary boot sector is invalid.
[Mon Nov 26 01:33:47 2012] NTFS-fs error (device loop1): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[Mon Nov 26 01:33:47 2012] NTFS-fs error (device loop1): ntfs_fill_super(): Not an NTFS volume.
[Mon Nov 26 01:36:06 2012] EXT4-fs (loop1): VFS: Can't find ext4 filesystem
[Mon Nov 26 01:40:45 2012] EXT4-fs (loop1): VFS: Can't find ext4 filesystem
Posts: 44
Joined: Fri Jul 13, 2012 6:07 pm
by chrisprt » Mon Nov 26, 2012 11:29 pm
For everyone having trouble mounting their formatted containers, create the volume with NO filesystem. After that's done, mount the file with --filesystem=none, which will merely create a /dev/loop1 device. After that, use the common filesystem formatting tool for your desired filesystem (e.g. mkfs.ext4 /dev/loop1). After that, you should be able to mount it fine.

Thanks to everyone in this thread for helping me get this all working!
Posts: 44
Joined: Fri Jul 13, 2012 6:07 pm
by vmkivinen » Sun Dec 02, 2012 8:57 pm
chrisprt wrote:For everyone having trouble mounting their formatted containers, create the volume with NO filesystem. After that's done, mount the file with --filesystem=none, which will merely create a /dev/loop1 device. After that, use the common filesystem formatting tool for your desired filesystem (e.g. mkfs.ext4 /dev/loop1). After that, you should be able to mount it fine.

Thanks to everyone in this thread for helping me get this all working!

How do I know what the /dev/loop# number is? Is there a way to list the "active" loop devices or something like that?

Thanks.
Posts: 3
Joined: Fri Nov 09, 2012 3:21 pm
by Genmutant » Tue Dec 04, 2012 8:56 am
Mounting doesn't seem to work for me.
After I enter the password, it hangs on the password input and nothing happens.
Code: Select all
/media$ truecrypt -t -k "" --protect-hidden=no -v -m=nokernelcrypto /dev/sda1 /media/truecrypt1/

If I kill the input (strg+x) there is an empty truecrypt1 and if I try to mount it again using truecrypt, it says it's already mounted.
The device is a complete encrypted extern hdd with NTFS (formatted in Windows, truecrypt).
Posts: 1
Joined: Tue Dec 04, 2012 8:49 am
by chrisprt » Mon Dec 10, 2012 12:22 am
vmkivinen wrote:
chrisprt wrote:For everyone having trouble mounting their formatted containers, create the volume with NO filesystem. After that's done, mount the file with --filesystem=none, which will merely create a /dev/loop1 device. After that, use the common filesystem formatting tool for your desired filesystem (e.g. mkfs.ext4 /dev/loop1). After that, you should be able to mount it fine.

Thanks to everyone in this thread for helping me get this all working!

How do I know what the /dev/loop# number is? Is there a way to list the "active" loop devices or something like that?

Thanks.

Sorry for the late reply, but you can use "df -h" to see the active loops.
Posts: 44
Joined: Fri Jul 13, 2012 6:07 pm
by vmkivinen » Mon Dec 10, 2012 11:13 am
chrisprt wrote:Sorry for the late reply, but you can use "df -h" to see the active loops.

But still very helpful. Thank you very much :)
Posts: 3
Joined: Fri Nov 09, 2012 3:21 pm
by Narf03 » Mon Dec 10, 2012 12:58 pm
Hi all, i have done doing exactly what you ppl say, but i cant find my compiled truecrypt, please help.
Code: Select all
pi@raspberrypi /temp2/truecrypt-7.1a-source $ sudo make NOGUI=1 WX_ROOT=/temp2/wxWidgets-2.8.12 wxbuild
Configuring wxWidgets library...
Building wxWidgets library...
In file included from /temp2/wxWidgets-2.8.12/include/wx/memory.h:16:0,
                 from /temp2/wxWidgets-2.8.12/include/wx/object.h:20,
                 from /temp2/wxWidgets-2.8.12/include/wx/wx.h:16,
                 from /temp2/wxWidgets-2.8.12/include/wx/wxprec.h:68:
/temp2/wxWidgets-2.8.12/include/wx/string.h:1205:7: note: the mangling of âva_listâ has changed in GCC 4.4
/temp2/wxWidgets-2.8.12/src/common/log.cpp:87:6: note: the mangling of âva_listâ has changed in GCC 4.4
/temp2/wxWidgets-2.8.12/src/common/string.cpp:84:39: warning: âwxEmptyStringâ initialized and declared âexternâ [enabled by default]
In file included from /temp2/wxWidgets-2.8.12/include/wx/debug.h:22:0,
                 from /temp2/wxWidgets-2.8.12/include/wx/defs.h:521,
                 from /temp2/wxWidgets-2.8.12/include/wx/wxprec.h:13:
/temp2/wxWidgets-2.8.12/include/wx/wxchar.h: In member function âint wxString::PrintfV(const wxChar*, va_list)â:
/temp2/wxWidgets-2.8.12/include/wx/wxchar.h:1080:9: note: the mangling of âva_listâ has changed in GCC 4.4
/temp2/wxWidgets-2.8.12/src/common/wxchar.cpp:1713:5: note: the mangling of âva_listâ has changed in GCC 4.4
In file included from /temp2/wxWidgets-2.8.12/include/wx/memory.h:16:0,
                 from /temp2/wxWidgets-2.8.12/include/wx/object.h:20,
                 from /temp2/wxWidgets-2.8.12/include/wx/wx.h:16,
                 from /temp2/wxWidgets-2.8.12/include/wx/wxprec.h:68:
/temp2/wxWidgets-2.8.12/include/wx/string.h:1205:7: note: the mangling of âva_listâ has changed in GCC 4.4
In file included from /temp2/wxWidgets-2.8.12/include/wx/memory.h:16:0,
                 from /temp2/wxWidgets-2.8.12/include/wx/object.h:20,
                 from /temp2/wxWidgets-2.8.12/include/wx/wx.h:16,
                 from /temp2/wxWidgets-2.8.12/include/wx/wxprec.h:68:
/temp2/wxWidgets-2.8.12/include/wx/string.h:1205:7: note: the mangling of âva_listâ has changed in GCC 4.4
pi@raspberrypi /temp2/truecrypt-7.1a-source $ sudo make NOGUI=1 WXSTATIC=1
Compiling Application.cpp
Compiling CommandLineInterface.cpp
Compiling FavoriteVolume.cpp
Compiling LanguageStrings.cpp
Compiling StringFormatter.cpp
Compiling TextUserInterface.cpp
TextUserInterface.cpp: In member function âvirtual void TrueCrypt::TextUserInterface::RestoreVolumeHeaders(TrueCrypt::SharedPtr<TrueCrypt::VolumePath>) constâ:
TextUserInterface.cpp:1374:11: warning: variable âheaderSizeâ set but not used [-Wunused-but-set-variable]
Compiling UserInterface.cpp
Compiling UserPreferences.cpp
Compiling Xml.cpp
Compiling Main.cpp
Compiling Resources.cpp
Linking truecrypt
pi@raspberrypi /temp2/truecrypt-7.1a-source $ ls
Boot    Core        ct-kip.h  License.html   Main      otp-pkcs11.h  pkcs11t-consolidated-d1.h  pkcs-11v2-20a3.h  Release    wxrelease
Build   Crypto      Driver    License.txt    Makefile  pkcs11f.h     pkcs11t.h                  Platform          Resources
Common  cryptoki.h  Format    License.txt.h  Mount     pkcs11.h      pkcs-11v2-20a3d3.h         Readme.txt        Volume
pi@raspberrypi /temp2/truecrypt-7.1a-source $
Posts: 230
Joined: Mon Jun 11, 2012 3:44 pm
by mattborja » Wed Dec 12, 2012 4:26 am
You guys do know you can also just download the guy's compiled binary here: http://reinhard-seiler.blogspot.co.at/2 ... e-for.html

After hours of trying to get it compiled, it appears there was some inconsistency using the latest version of PKCS11 preventing me from successfully doing make WXSTATIC=1 in the truecrypt sources directory. I returned to the same article we've all been using (http://reinhard-seiler.blogspot.com/201 ... ry-pi.html) and found the discrete "you can download them here" link which is a link to download the binary (already compiled) version.

To mount my encrypted drive, I now run the following (bypasses the device-mapper error):

Code: Select all
sudo ./truecrypt -m=nokernelcrypto /dev/sda1 /media/somemountpoint/
Posts: 3
Joined: Thu Oct 25, 2012 3:29 pm