Full CNC Case for Raspberry Pi


8 posts
by fumble » Thu Jan 26, 2012 6:30 pm
Hello everyone,

This is our project for the creation of an aluminum and lexan case machined by CNC. Tell us what you think about it.

Bonjour tout le monde,

Voici notre projet de création d'un boitier en aluminium et lexan, entièrement usiné par CNC. Dites nous ce que vous en pensez.

Fumble and Alumyx.

http://uppix.net/b/2/3/0a914c9b6969b164ec5e1840ed0c2.png

http://uppix.net/a/9/e/e6a70dc09a1d095e80134b00cf920.png
Posts: 3
Joined: Thu Jan 26, 2012 6:18 pm
by jacpot » Thu Jan 26, 2012 6:43 pm
Bonjour, votre projet est pas mal du tout, seul une remarque, le pied, en dirais qu'il provient d'un imac :) niveau esthétique, futuriste épuré, sa change, sa ne fais pas de mal.

Sinon, avez vous en projet d'en produire un en "pavé" c'est a dire juste comme une unité centrale, en aluminium brossé et pourquoi pas anodisé ou sablé.

Très beau travail
Posts: 1
Joined: Thu Jan 19, 2012 7:04 pm
by ArkoXS » Thu Jan 26, 2012 9:54 pm
Nice design, do you have additional images.

Will the design be made public or are you aiming on a commercial product?

Regards,

P.S. Didn't get that last post. jacpot
Posts: 3
Joined: Thu Jan 26, 2012 4:01 pm
by Alumyx » Thu Jan 26, 2012 11:13 pm
We're not really fan of Apple … xD But it's true that the foot has a little family resemblance! Too bad! For now, it"s just a prototype. If we have to market it, it will be without the foot. In the current release, the case can be mounted on a Picatinny rail. It"s an airsoft trip.

By the way, this the same pictures with a black background.

http://uppix.net/f/c/f/25a9403d0c2b4f8fbf141c8e7e8e9.jpghttp://uppix.net/c/0/4/b4f7b7776c06564329887f7b20d66.jpg
Posts: 1
Joined: Thu Jan 26, 2012 11:02 pm
by fumble » Fri Jan 27, 2012 2:01 pm
Another pictures of the case!!

But we need exact measurements for outputs, if someone knows it would be nice to share :)

http://uppix.net/e/9/9/e2791884f5b11194f0c6f34425266.jpg

http://uppix.net/d/7/1/fe4ef6d3f7b5c617b4da0de37e6eb.jpg

http://uppix.net/1/3/e/b5d6fa22d1be7c2007ed5b7151cd0.jpg
Posts: 3
Joined: Thu Jan 26, 2012 6:18 pm
by Hugh Reynolds » Fri Jan 27, 2012 2:22 pm
Interesting design.  The images are so dark.  And getting darker.

Is that just IE8...(no it's the same in Chrome) or do you have better photo receptors than me?
Posts: 61
Joined: Tue Sep 06, 2011 9:48 am
by fumble » Fri Jan 27, 2012 3:28 pm
You're right pictures are very dark

http://uppix.net/8/9/8/08c8d1da9f5e182172638bee39e39.png

http://uppix.net/5/3/7/2d512833c085745803d1e8e0fe56f.png
Posts: 3
Joined: Thu Jan 26, 2012 6:18 pm
by HansH » Fri Jan 27, 2012 7:27 pm
fumble said:


But we need exact measurements for outputs, if someone knows it would be nice to share :)


Nice case, looks expensive..

Use Gert measurements: http://www.raspberrypi.org/for.....ical-data/

pcb board is 56mm width (not the 53.98mm mentioned in the FAQ)
Posts: 212
Joined: Mon Sep 05, 2011 7:49 am